New SDC File Command (TimeQuest Timing Analyzer)

You access this command by clicking New SDC File on the File menu in the TimeQuest Timing Analyzer.

Opens the Quartus® Prime Standard Edition Text Editor, where you can create a new Synopsys Design Constraints File (.sdc) Definition. The Quartus® Prime Standard Edition Text Editor provides line numbering, syntax coloring, and calltips. You can enter timing constraints and exceptions directly, or specify them with theInsert Constraintcommand.

Note:
  • The TimeQuest analyzer does not apply constraints and exceptions specified in the Quartus® Prime Standard Edition Text Editor until you use the Read SDC File command.
  • If you work with a design using a previous SDC File, and then create a new one, to have the TimeQuest analyzer re-read the SDC constraints, first use the Reset Design command, and then the Read SDC File command.

Contact Altera | Legal Notice

Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.