agent_dvm0_dvm_agent_disable_status

         This status register is used to indicate that a change to the active agent vector has taken effect.  When an agent is removed from the active agent vector, snoops targeting that master may still be queued or inflight.  While snoops are outstanding, the master must continue to operate to satisfy snoop requests.
This register indicates that all snoops to the disabled agents have completed and no new snoops will be issued to those agents.  The status indicates whether any snoops outstanding at the time of the last modification of the DVM active vector register(s) have all completed or not.  A value of 1 indicates that the snoops have all completed and it is safe to power off or otherwise disable the masters that were removed from the active vector.  A value of 0 indicates that snoops are still outstanding and the master must continue to operate and accept snoops.

Module Instance	Base Address	Register Address
`i_ccu_noc_registers`	`0xF7000000`	`0xF7034048`

Size: 64

Offset: 0x34048

Access: RO

Access mode: SECURE | PRIVILEGEMODE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48
`UNSD_63_1` `RO 0x0`
47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
`UNSD_63_1` `RO 0x0`
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`UNSD_63_1` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`UNSD_63_1` `RO 0x0`															`stat` `RO 0x1`

agent_dvm0_dvm_agent_disable_status Fields

Bit	Name	Description	Access	Reset
63:1	`UNSD_63_1`		`RO`	`0x0`
0	`stat`	1'b1: A value of 1 indicates snoops have completed for disabled agents 1'b0: A value of 0 indicates snoops are still oustanding	`RO`	`0x1`