spare_area_skip_bytes

         Spare area skip bytes 
      
Module Instance Base Address Register Address
i_nand_config 0xFFB80000 0xFFB80230

Size: 32

Offset: 0x230

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

value

RW 0x0

spare_area_skip_bytes Fields

Bit Name Description Access Reset
5:0 value
Number of bytes to skip from start of spare area before last ECC sector
                                        data starts. The bytes will be written with the value programmed in the
                                        spare_area_marker register. This register could be potentially used to
                                        preserve the bad block marker in the spare area by marking it good.
                                        The default value is zero which means no bytes will be skipped and
                                        last ECC sector will start from the beginning of spare area. This value
                                        should be an even number.
RW 0x0