GPIO_DEBOUNCE
Name: Debounce enable
Size: 1-32 bits
Address Offset: 0x48
Read/Write Access: Read/Write
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_gpio_0_DW_apb_gpio_addr_block | 0xFFC03200 | 0xFFC03248 |
| i_gpio_1_DW_apb_gpio_addr_block | 0xFFC03300 | 0xFFC03348 |
Size: 32
Offset: 0x48
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
GPIO_DEBOUNCE RW 0x0 |
||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
GPIO_DEBOUNCE RW 0x0 |
|||||||||||||||
GPIO_DEBOUNCE Fields
| Bit | Name | Description | Access | Reset | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 23:0 | GPIO_DEBOUNCE |
Controls whether an external signal that is the source of an interrupt needs to be debounced to remove any spurious glitches. Writing a 1 to a bit in this register enables the debouncing circuitry. A signal must be valid for two periods of an external clock before it is internally processed. 0 No debounce (default) 1 Enable debounce DO NOT PUBLISH BELOW THIS LINE For internal usage only, [0:18] for SDM, [0:23] for HPS
|
RW | 0x0 |