watchdog0 

         Per-Master Security bit for watchdog0
Module Instance Base Address Register Address
noc_fw_l4_sys_l4_sys_scr 0xFFD21100 0xFFD21168

Size: 32

Offset: 0x68

Access: RW

Access mode: SECURE | PRIVILEGEMODE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

axi_ap

RW 0x0

Reserved

fpga2soc

RW 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

dma

RW 0x0

Reserved

mpu

RW 0x0

watchdog0 Fields

Bit Name Description Access Reset
24 axi_ap 
Security bit configuration for transactions from axi_ap to watchdog0. When cleared (0), only Secure transactions are allowed. When set (1), both Secure and Non-Secure transactions are allowed.
 RW 0x0
16 fpga2soc 
Security bit configuration for transactions from fpga2soc to watchdog0. When cleared (0), only Secure transactions are allowed. When set (1), both Secure and Non-Secure transactions are allowed.
 RW 0x0
8 dma 
Security bit configuration for transactions from dma to watchdog0. When cleared (0), only Secure transactions are allowed. When set (1), both Secure and Non-Secure transactions are allowed.
 RW 0x0
0 mpu 
Security bit configuration for transactions from mpu to watchdog0. When cleared (0), only Secure transactions are allowed. When set (1), both Secure and Non-Secure transactions are allowed.
 RW 0x0