agent_ccc0_ccc_active_vector_0

         This register specifies which of the ACE masters are currently active and capable of receiving snoop requests.  This register contains a bit vector where each bit corresponds to an ACE master bridge.  The Bridge ID determines which bit corresponds to each bridge.
This vector can be used to disable snoop-only ACE agents, or to power off an ACE agent that may still have stale directory content. Note that ACE CPUs will often leave stale directory content.
A value of 1 indicates that the ACE agent is enabled and capable of accepting snoops. A value of 0 indicates that the ACE agent is disabled and snoops should not be sent.  The default for this register is all ACE agents are active.

Module Instance	Base Address	Register Address
`i_ccu_noc_registers`	`0xF7000000`	`0xF7030020`

Size: 64

Offset: 0x30020

Access: RO

Access mode: SECURE | PRIVILEGEMODE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48
`ACTIVE_AGENT_VECTOR` `RO 0x7`
47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
`ACTIVE_AGENT_VECTOR` `RO 0x7`
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`ACTIVE_AGENT_VECTOR` `RO 0x7`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`ACTIVE_AGENT_VECTOR` `RO 0x7`

agent_ccc0_ccc_active_vector_0 Fields

Bit	Name	Description	Access	Reset
63:0	`ACTIVE_AGENT_VECTOR`	-: Active agent vector	`RO`	`0x7`