chip_enable_dont_care
Device can work in the chip enable dont care mode
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_nand_config | 0xFFB80000 | 0xFFB800D0 |
Size: 32
Offset: 0xD0
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
Reserved |
flag RW 0x0 |
||||||||||||||
chip_enable_dont_care Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 0 | flag |
Controller can interleave commands between banks when this feature is enabled.
[list][*]1 - Device in dont care mode
[*]0 - Device cares for chip enable[/list]
|
RW | 0x0 |