bridge_mem0_sprt_13_118_brus

         This register tracks the status of the bridge receiver upsizer/downsize structure. It can be used with the other status registers to check for packets that are still occupying the bridge. Each of the host's receiving interfaces, up to 4, can have upsizing/downsizing logic, and this register tracks the status of all 4 interfaces. This is a read-only register.
      
Module Instance Base Address Register Address
i_ccu_noc_registers 0xF7000000 0xF70201B0

Size: 32

Offset: 0x201B0

Access: RO

Access mode: SECURE | PRIVILEGEMODE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

UNSD_31_4

RO 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

UNSD_31_4

RO 0x0

VALID_IF_D

RO 0x0

VALID_IF_C

RO 0x0

VALID_IF_B

RO 0x0

VALID_IF_A

RO 0x0

bridge_mem0_sprt_13_118_brus Fields

Bit Name Description Access Reset
31:4 UNSD_31_4
                 
                 
RO 0x0
3 VALID_IF_D
                 -: Interface D upsizer/downsizer valid

                 
RO 0x0
2 VALID_IF_C
                 -: Interface C upsizer/downsizer valid

                 
RO 0x0
1 VALID_IF_B
                 -: Interface B upsizer/downsizer valid

                 
RO 0x0
0 VALID_IF_A
                 -: Interface A upsizer/downsizer valid

                 
RO 0x0