write_mode 

         The type of write sequence that the controller will follow for pipe write commands.
Module Instance Base Address Register Address
sdm_i_nand_config 0xFFA10000 0xFFA101D0

Size: 32

Offset: 0x1D0

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

value

RW 0x0

write_mode Fields

Bit Name Description Access Reset
3:0 value 
The values in the field should be as follows[list]
                             [*]4'h0 - This value informs the controller that the pipe write sequence to follow is of
                                    a normal write with the following sequence,
                                    C80, Address, Data, C10.....
                             [*]4'h1 - This value informs the controller that the pipe write sequence to follow is of
                                    a Cache Program with the following sequence,
                                    C80, Address, Data, C15, ....., C80, Address, Data, C10.
                             [*]4'h2 - This value informs the controller that the pipe write sequence to follow is of
                                    a Two/Four Plane Program with the following sequence,
                                    C80, Address, Data, C11, C81, Address, Data, C10.....
                             [*]4'h3 - This value informs the controller that the pipe write sequence to follow is of
                                    a 'N' Plane Program with the following sequence,
                                    C80, Address, Data, C11, C80, Address, Data, C10.....
                             [*]4'h4 - This value informs the controller that the pipe write sequence to follow is of
                                    a 'N' Plane Cache Program with the following sequence,
                                    C80, Address, Data, C11, C80, Address, Data, C15.....C80, Address, Data, C11, 
                                    C80, Address, Data, C10.
                             [*]4'h5 - This value informs the controller that the pipe write sequence to follow is of
                                    a 'N' Plane Cache Program with the following sequence,
                                    C80, Address, Data, C11, C81, Address, Data, C15.....C80, Address, Data, C11, 
                                    C81, Address, Data, C10.
                             [*]4'h6 - 4'h15 - Reserved.
                             [/list]
                             ..... indicates that the previous sequence is repeated till the last page.
RW 0x0