IC_CLR_RD_REQ

         Name: Clear RD_REQ Interrupt Register
Size: 1 bit
Address Offset: 0x50
Read/Write Access: Read
Dependencies: This register is not applicable  when IC_ULTRA_FAST_MODE=1

Module Instance	Base Address	Register Address
`sdm_i2c_0_DW_apb_i2c_addr_block0`	`0xFF8D0100`	`0xFF8D0150`
`sdm_i2c_1_DW_apb_i2c_addr_block1`	`0xFF8D0200`	`0xFF8D0250`

Size: 32

Offset: 0x50

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RSVD_IC_CLR_RD_REQ` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`RSVD_IC_CLR_RD_REQ` `RO 0x0`															`CLR_RD_REQ` `RO 0x0`

IC_CLR_RD_REQ Fields

Bit	Name	Description	Access	Reset
31:1	`RSVD_IC_CLR_RD_REQ`	Reserved bits - Read Only	`RO`	`0x0`
0	`CLR_RD_REQ`	Read this register to clear the RD_REQ interrupt (bit 5) of the IC_RAW_INTR_STAT register. Reset value: 0x0	`RO`	`0x0`