IC_RX_TL

         Name: I2C Receive FIFO Threshold Register
Size: 8bits
Address Offset: 0x38
Read/Write Access: Read/Write
      
Module Instance Base Address Register Address
sdm_i2c_0_DW_apb_i2c_addr_block0 0xFF8D0100 0xFF8D0138
sdm_i2c_1_DW_apb_i2c_addr_block1 0xFF8D0200 0xFF8D0238

Size: 32

Offset: 0x38

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

RSVD_IC_RX_TL

RO 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RSVD_IC_RX_TL

RO 0x0

RX_TL

RW 0x0

IC_RX_TL Fields

Bit Name Description Access Reset
31:8 RSVD_IC_RX_TL
Reserved bits - Read Only
RO 0x0
7:0 RX_TL
Receive FIFO Threshold Level
Controls the level of entries (or above) that triggers
the RX_FULL interrupt (bit 2 in IC_RAW_INTR_STAT register).
The valid range is 0-255, with the additional restriction that
hardware does not allow this value to be set to a value larger
than the depth of the buffer. If an attempt is made to do that,
the actual value set will be the maximum depth of the buffer.
A value of 0 sets the threshold for 1 entry, and a value of 255
sets the threshold for 256 entries.
Reset value: IC_RX_TL configuration parameter
RW 0x0