usb1_l3master

         Controls the L3 master HPROT AHB-Lite signal.
These register bits should be updated only during system initialization prior to removing the peripheral from reset. They may not be changed dynamically during peripheral operation
All fields are reset by a cold or warm reset.

Module Instance	Base Address	Register Address
`i_sys_mgr_core`	`0xFFD12000`	`0xFFD1203C`

Size: 32

Offset: 0x3C

Access: RW

Access mode: PRIVILEGEMODE | SECURE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`						`hauser22_13` `RW 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`		`hauser7_6` `RW 0x3`		`Reserved`		`hauser_1` `RW 0x0`	`hauser_0` `RW 0x0`	`Reserved`				`hprot` `RW 0x1`

usb1_l3master Fields

Bit	Name	Description	Access	Reset
25:16	`hauser22_13`	hauser[22:13] sid	`RW`	`0x0`
13:12	`hauser7_6`	hauser[7:6] domain	`RW`	`0x3`
9	`hauser_1`	hauser[1] secure	`RW`	`0x0`
8	`hauser_0`	hauser[0] allocate	`RW`	`0x0`
3:0	`hprot`	HPROT[0]: Opcode/Data HPROT[1]: User/Privilege HPROT[2]: Non-Bufferable/Bufferable HPROT[3]: Non-Cacheable/Cacheable	`RW`	`0x1`