ECC_accctrl

         These bits determine which byte of data/ecc to write to RAM.

Module Instance	Base Address	Register Address
`ecc_emac2_rx_ecc_registerBlock`	`0xFF8C1000`	`0xFF8C1078`

Size: 32

Offset: 0x78

Access: RW

Access mode: PRIVILEGEMODE

Note: The processor must make a privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`							`RDWR` `0x0`	`Reserved`						`ECCOVR` `0x0`	`DATAOVR` `0x0`

ECC_accctrl Fields

Bit	Name	Description	Access	Reset
8	`RDWR`	Control for read/write.	`RW`	`0x0`
1	`ECCOVR`	ECC Data Override.	`RW`	`0x0`
0	`DATAOVR`	RAM Data Override. Override the ECC_dataBUS register with RAM data in read mode set by ECC_RW. 1’b0: Data override disabled. 1’b1: Data override enabled.	`RW`	`0x0`