reg_dramsts
DRAM Status Register
| Module Instance | Base Address | Register Address |
|---|---|---|
| iohmc_ctrl_inst_0_iohmc_ctrl_mmr_top_inst | 0xF8010000 | 0xF80100EC |
Size: 32
Offset: 0xEC
Access: RO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
Reserved |
phy_cal_fail RO 0x0 |
phy_cal_success RO 0x0 |
|||||||||||||
reg_dramsts Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 1 | phy_cal_fail |
iohmc_ctrl_mmr_top_inst.phy_cal_fail Name:PHY Calibration Failed Description:This bit will be set to 1 if the PHY was unable to calibrate. |
RO | 0x0 |
| 0 | phy_cal_success |
iohmc_ctrl_mmr_top_inst.phy_cal_success Name:PHY Calibration Successful Description:This bit will be set to 1 if the PHY was able to successfully calibrate. |
RO | 0x0 |