agent_ccc0_ccc_indirect_ram_cont_2

         This is the indirect access RAM content register. Its use is conjunction with the indirect access trigger register. On an indirect read, data is written to this register. On an indirect write, content from this register is written into the RAM. On a read-modify-write, content from this register is used for the XOR function.
Since the RAM data width may be larger than 64 bits, multiple registers are used to hold the data. Any bits beyond the data width are unused.

Module Instance	Base Address	Register Address
`i_ccu_noc_registers`	`0xF7000000`	`0xF70300A0`

Size: 64

Offset: 0x300A0

Access: RW

Access mode: SECURE | PRIVILEGEMODE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48
`RAM_CONTENTS_132_128` `RW 0x0`
47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
`RAM_CONTENTS_132_128` `RW 0x0`
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RAM_CONTENTS_132_128` `RW 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`RAM_CONTENTS_132_128` `RW 0x0`

agent_ccc0_ccc_indirect_ram_cont_2 Fields

Bit	Name	Description	Access	Reset
63:0	`RAM_CONTENTS_132_128`		`RW`	`0x0`