pllc1
Channel C1 settings for the periph PLL
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_clk_mgr_perpllgrp | 0xFFD100A4 | 0xFFD100F8 |
Size: 32
Offset: 0x54
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
phrst RW 0x0 |
phinc RW 0x0 |
bypas RW 0x0 |
en RW 0x1 |
Reserved |
||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
Reserved |
div RW 0x4 |
||||||||||||||
pllc1 Fields
| Bit | Name | Description | Access | Reset | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 27 | phrst |
If ictl_vpll_pr1_phrst_a=1'b1, the phase of PLLC1 clock is reset to default phase as the PLL is just started.
|
RW | 0x0 | ||||||
| 26 | phinc |
When a positive edge is induced, one of the positive edges of PLLC1 clock is pushed out by 1/8th of VCO period.
|
RW | 0x0 | ||||||
| 25 | bypas |
PLL channel 1 output bypass; before lock, it is muted, regardless of its value. After lock, if enabled and bypass=1, this outputs refclk.
|
RW | 0x0 | ||||||
| 24 | en |
PLL channel 1 output enable; the output is muted before lock signal is asserted, regardless of the value; after lock is asserted, it is glitch-free enable ock_vpll_pr1, if enabled
|
RW | 0x1 | ||||||
| 7:0 | div |
PLL channel 1 divider ratio in binary code; Can be dynamically updated after lock signal is asserted, glitch-free from 8'd3 to 8'd255; could encounter glitches for 8'd1 and 8d'2 cases. |
RW | 0x4 |