probe_emac_main_TransactionStatProfiler_OverflowStatus

         EMAC Probe Transaction Statistics Profiler Overflow Status Register

Module Instance	Base Address	Register Address
`i_noc_ccu_ios_probe_emac_main_TransactionStatProfiler`	`0xFFD23000`	`0xFFD2306C`

Size: 32

Offset: 0x6C

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`															`OVERFLOWSTATUS` `RO 0x0`

probe_emac_main_TransactionStatProfiler_OverflowStatus Fields

Bit	Name	Description	Access	Reset
0	`OVERFLOWSTATUS`	Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use. No tenure lines have been allocated to the port. The number of bits in this register is equal to the value set for parameter nObservable.	`RO`	`0x0`

Bit

Name

Description

Access

Reset

OVERFLOWSTATUS

Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use. No tenure lines have been allocated to the port. The number of bits in this register is equal to the value set for parameter nObservable.

RO

0x0