GPIO_PORTA_EOI
Name: Port A clear interrupt register
Size: 1-32 bits
Address Offset: 0x4c
Read/Write Access: Write
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_gpio_0_DW_apb_gpio_addr_block | 0xFFC03200 | 0xFFC0324C |
| i_gpio_1_DW_apb_gpio_addr_block | 0xFFC03300 | 0xFFC0334C |
Size: 32
Offset: 0x4C
Access: WO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
GPIO_PORTA_EOI WO 0x0 |
||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
GPIO_PORTA_EOI WO 0x0 |
|||||||||||||||
GPIO_PORTA_EOI Fields
| Bit | Name | Description | Access | Reset | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 23:0 | GPIO_PORTA_EOI |
Controls the clearing of edge type interrupts from Port A. When a 1 is written into a corresponding bit of this register, the interrupt is cleared. All interrupts are cleared when Port A is not configured for interrupts. 0 No interrupt clear (default) 1 Clear interrupt DO NOT PUBLISH BELOW THIS LINE For internal usage only, [0:18] for SDM, [0:23] for HPS
|
WO | 0x0 |