pin18sel

         HPS Pinmux Select for IO18

Module Instance	Base Address	Register Address
`i_dedio_pinmux_csr`	`0xFFD13000`	`0xFFD13048`

Size: 32

Offset: 0x48

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`												`val` `RW 0x9`

pin18sel Fields

Bit	Name	Description	Access	Reset
3:0	`val`	Select value determines which interface has been selected for IO18. It also determines the output_enable for the respective interface. Its value can range from 0 to 9. 0000 (0) -- Pin connected to emac0.rxd0 0001 (1) -- Pin connected to usb1.data2 0010 (2) -- Pin connected to trace.d4 0011 (3) -- Pin connected to nand.adq10 0100 (4) -- reserved 0101 (5) -- reserved 0110 (6) -- reserved 0111 (7) -- reserved 1000 (8) -- Pin connected to gpio0.io18 Note: Platform Designer also programs this encoding value if you select this pin as the clock manager external oscillator input. 1001 (9) -- reserved	`RW`	`0x9`

Bit

Name

Description

Access

Reset

3:0

val

Select value determines which interface has been selected for IO18. It also determines the output_enable for the respective interface. Its value can range from 0 to 9. 
0000 (0) -- Pin connected to emac0.rxd0
0001 (1) -- Pin connected to usb1.data2
0010 (2) -- Pin connected to trace.d4
0011 (3) -- Pin connected to nand.adq10
0100 (4) -- reserved
0101 (5) -- reserved
0110 (6) -- reserved
0111 (7) -- reserved
1000 (8) -- Pin connected to gpio0.io18  Note: Platform Designer also programs this encoding value if you select this pin as the clock manager external oscillator input.
1001 (9) -- reserved

RW

0x9