AUTOWB_CORRHADDR
This register shows the high address of the current autoWB correction SBE.
| Module Instance | Base Address | Register Address |
|---|---|---|
| soc_hmc_adp_csr_inst_0_ocp_slv_block | 0xF8011000 | 0xF80111BC |
Size: 32
Offset: 0x1BC
Access: RO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
Reserved |
SWBADDRESS 0x0 |
||||||||||||||
AUTOWB_CORRHADDR Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 4:0 | SWBADDRESS |
recent autoWB correction high address. This register shows the address of the current autoWB correction single-bit error. This address is logged when a new serr_req is generated to the system. This is gated by the single-bit error interrupt enable and ecc_en. |
RO | 0x0 |