two_row_addr_cycles

         Attached device has only 2 ROW address cycles

Module Instance	Base Address	Register Address
`i_nand_config`	`0xFFB80000`	`0xFFB80190`

Size: 32

Offset: 0x190

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`											`four` `RW 0x0`	`Reserved`			`flag` `RW 0x0`

two_row_addr_cycles Fields

Bit	Name	Description	Access	Reset
4	`four`	This flag must be set for devices which allow for 4 ROW address cycles instead of the usual 3.	`RW`	`0x0`
0	`flag`	This flag must be set for devices which allow for 2 ROW address cycles instead of the usual 3. Alternatively, bootstrap_two_row_addr_cycles when asserted will set this flag.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

four

This flag must be set for devices which allow for 4 ROW address cycles instead
                                      of the usual 3.

RW

0x0

flag

This flag must be set for devices which allow for 2 ROW address cycles instead
                                     of the usual 3. Alternatively, bootstrap_two_row_addr_cycles when asserted will
                                     set this flag.

RW

0x0