mpul2flushtimeout

         The MPU L2 FLUSH handshake timeout will default to 1,048,576 which at 100 MHz for l4_sys_free_clk will 1048 micro-seconds.  This value will be a 32 bit programmable value in SW.

Module Instance	Base Address	Register Address
`i_rst_mgr_rstmgr`	`0xFFD11000`	`0xFFD11068`

Size: 32

Offset: 0x68

Access: RW

Access mode: PRIVILEGEMODE

Note: The processor must make a privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`val` `RW 0x100000`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`val` `RW 0x100000`

mpul2flushtimeout Fields

Bit	Name	Description	Access	Reset
31:0	`val`	MPU L2 flush handshake time-out value.	`RW`	`0x100000`