bypass

         Contains fields that control bypass for clocks derived from the Main PLL.
1: The clock is bypassed to boot_clk.
0: The clock is derived from the 5:1 active mux.

Module Instance	Base Address	Register Address
`i_clk_mgr_mainpllgrp`	`0xFFD10030`	`0xFFD1003C`

Size: 32

Offset: 0xC

Access: RW

Access mode: PRIVILEGEMODE

Note: The processor must make a privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`													`s2fuser0` `RW 0x1`	`noc` `RW 0x1`	`mpu` `RW 0x1`

bypass Fields

Bit	Name	Description	Access	Reset
2	`s2fuser0`	If set, the s2f_user0_clk will be bypassed to the boot_clk.	`RW`	`0x1`
1	`noc`	If set, the NOC clock group will be bypassed to boot_clk.	`RW`	`0x1`
0	`mpu`	If set, the MPU clock group will be bypassed to the boot_clk.	`RW`	`0x1`