probe_emac_main_Probe_TraceAlarmEn

         EMAC Probe Trace Alarm Register

Module Instance	Base Address	Register Address
`i_noc_ccu_ios_probe_emac_main_Probe`	`0xFFD22800`	`0xFFD22818`

Size: 32

Offset: 0x18

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`													`TRACEALARMEN` `RW 0x0`

probe_emac_main_Probe_TraceAlarmEn Fields

Bit	Name	Description	Access	Reset
2:0	`TRACEALARMEN`	Register TraceAlarmEn controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set. The number of bits in register TraceAlarmEn is determined by the value set for parameter nFilter + 1.Bit nFilter controls the lookup table output, and bits nFilter:0 control the corresponding filter output. When parameter nFilter is set to None, TraceAlarmEn is reserved.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

2:0

TRACEALARMEN

Register TraceAlarmEn controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set. The number of bits in register TraceAlarmEn is determined by the value set for parameter nFilter + 1.Bit nFilter controls the lookup table output, and bits nFilter:0 control the corresponding filter output. When parameter nFilter is set to None, TraceAlarmEn is reserved.

RW

0x0