probe_ccu_main_Probe_TraceAlarmEn
CCU probe Trace Alarm Enable Register
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_noc_ccu_ios_probe_ccu_main_Probe | 0xFFD22400 | 0xFFD22418 |
Size: 32
Offset: 0x18
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
Reserved |
TRACEALARMEN RW 0x0 |
||||||||||||||
probe_ccu_main_Probe_TraceAlarmEn Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 2:0 | TRACEALARMEN |
Register TraceAlarmEn controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set. The number of bits in register TraceAlarmEn is determined by the value set for parameter nFilter + 1.Bit nFilter controls the lookup table output, and bits nFilter:0 control the corresponding filter output. When parameter nFilter is set to None, TraceAlarmEn is reserved. |
RW | 0x0 |