gpio_raw_intstatus
This is the Raw Interrupt Status Register for Port A Data Register. It is used with the Interrupt Mask Register to allow interrupts from the Port A Data Register.
| Module Instance | Base Address | Register Address |
|---|---|---|
| gpio0 | 0xFF708000 | 0xFF708044 |
| gpio1 | 0xFF709000 | 0xFF709044 |
| gpio2 | 0xFF70A000 | 0xFF70A044 |
Offset: 0x44
Access: RO
Important: To prevent indeterminate
system behavior, reserved areas of memory must not be accessed by software or
hardware. Any area of the memory map that is not explicitly defined as a register
space or accessible memory is considered reserved.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Reserved |
gpio_raw_intstatus RO 0x0 |
||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
gpio_raw_intstatus RO 0x0 |
|||||||||||||||
gpio_raw_intstatus Fields
| Bit | Name | Description | Access | Reset | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 28:0 | gpio_raw_intstatus | Raw interrupt of status of Port A Data Register (premasking bits). Note that only bits[26:0] are implemented for gpio2.
|
RO | 0x0 |