indaddrtrig

Module Instance	Base Address	Register Address
`qspiregs`	`0xFF705000`	`0xFF70501C`

Offset: 0x1C

Access: RW

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`addr` `RW 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`addr` `RW 0x0`

indaddrtrig Fields

Bit	Name	Description	Access	Reset
31:0	`addr`	This register is used by the QSPI controller to determine whether incoming memory accesses on the QSPI AHB memory window are meant to access the SRAM FIFO or to be interpreted as direct access requests. When the incoming access is between `indaddrtrig` and `indaddrtrig`+15, the access is directed towards SRAM FIFO; otherwise it is interpreted as a direct access request. Note that it does not matter which address in the `indaddrtrig` to `indaddrtrig`+15 interval is accessed, any access is treated the same and will be directed to SRAM FIFO. When direct mode is not used, the recommended procedure is to leave `indaddrtrig` as 0, and use the base of the AHB memory window to access the SRAM FIFO.	`RW`	`0x0`