l3master
Controls the L3 master ARCACHE and AWCACHE AXI signals.
These register bits should be updated only during system initialization prior to removing the peripheral from reset. They may not be changed dynamically during peripheral operation
All fields are reset by a cold or warm reset.
Module Instance | Base Address | Register Address |
---|---|---|
sysmgr | 0xFFD08000 | 0xFFD08114 |
Offset: 0x114
Access: RW
Important: To prevent indeterminate
system behavior, reserved areas of memory must not be accessed by software or
hardware. Any area of the memory map that is not explicitly defined as a register
space or accessible memory is considered reserved.
Bit Fields | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Reserved |
|||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Reserved |
awcache_0 RW 0x0 |
arcache_0 RW 0x0 |
l3master Fields
Bit | Name | Description | Access | Reset | ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
7:4 | awcache_0 | Specifies the value of the module AWCACHE signal.
|
RW | 0x0 | ||||||||||||||||||||||||||||||||||
3:0 | arcache_0 | Specifies the value of the module ARCACHE signal.
|
RW | 0x0 |