pinmux_dedicated_io_11
This register is used to control the peripherals connected to dedicated IO pin 11
Only reset by a cold reset (ignores warm reset).
NOTE: These registers should not be modified after IO configuration.There is no support for dynamically changing the Pin Mux selections.
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_io48_pin_mux_dedicated_io_grp | 0xFFD07200 | 0xFFD07228 |
Offset: 0x28
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Reserved |
sel RW 0xF |
||||||||||||||
pinmux_dedicated_io_11 Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 31:4 | Reserved | Reserved |
RO | 0x0 |
| 3:0 | sel | Select peripheral signals connected Dedicated IO 11 0000 (0) Pin is connected to Peripheral signal not applicable 0001 (1) Pin is connected to Peripheral signal not applicable 0010 (2) Pin is connected to Peripheral signal not applicable 0011 (3) Pin is connected to Peripheral signal spim0.clk 0100 (4) Pin is connected to Peripheral signal cm.pll_clk0 0101 (5) Pin is connected to Peripheral signal not applicable 0110 (6) Pin is connected to Peripheral signal not applicable 0111 (7) Pin is connected to Peripheral signal not applicable 1000 (8) Pin is connected to Peripheral signal qspi.ss1 1001 (9) Pin is connected to Peripheral signal not applicable 1010 (10) Pin is connected to Peripheral signal not applicable 1011 (11) Pin is connected to Peripheral signal not applicable 1100 (12) Pin is connected to Peripheral signal not applicable 1101 (13) Pin is connected to Peripheral signal not applicable 1110 (14) Pin is connected to Peripheral signal nand.ale 1111 (15) Pin is connected to Peripheral signal gpio2.io7 |
RW | 0xF |