pinmux_shared_io_q4_11

         This register is used to control the peripherals connected to shared IO48 pin Q4 11
Only reset by a cold reset (ignores warm reset).
NOTE: These registers should not be modified after IO configuration.There is no support for dynamically changing the Pin Mux selections.

Module Instance	Base Address	Register Address
`i_io48_pin_mux_shared_3v_io_grp`	`0xFFD07000`	`0xFFD070B8`

Offset: 0xB8

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`												`sel` `RW 0xF`

pinmux_shared_io_q4_11 Fields

Bit	Name	Description	Access	Reset
31:4	`Reserved`	Reserved	`RO`	`0x0`
3:0	`sel`	Select peripheral signals connected shared IO48 Q4 11 0000 (0) Pin is connected to Peripheral signal i2c_emac0.sda 0001 (1) Pin is connected to Peripheral signal emac0.mdio 0010 (2) Pin is connected to Peripheral signal spis1.ss0_n 0011 (3) Pin is connected to Peripheral signal spim0.miso 0100 (4) Pin is connected to Peripheral signal not applicable 0101 (5) Pin is connected to Peripheral signal not applicable 0110 (6) Pin is connected to Peripheral signal not applicable 0111 (7) Pin is connected to Peripheral signal not applicable 1000 (8) Pin is connected to Peripheral signal emac2.rxd2 1001 (9) Pin is connected to Peripheral signal not applicable 1010 (10) Pin is connected to Peripheral signal not applicable 1011 (11) Pin is connected to Peripheral signal not applicable 1100 (12) Pin is connected to Peripheral signal trace.d2 1101 (13) Pin is connected to Peripheral signal not applicable 1110 (14) Pin is connected to Peripheral signal nand.adq14 1111 (15) Pin is connected to Peripheral signal gpio1.io22	`RW`	`0xF`

Bit

Name

Description

Access

Reset

31:4

Reserved

Reserved

RO

0x0

3:0

sel

Select peripheral signals connected shared IO48 Q4 11
0000 (0) Pin is connected to Peripheral signal i2c_emac0.sda
0001 (1) Pin is connected to Peripheral signal emac0.mdio
0010 (2) Pin is connected to Peripheral signal spis1.ss0_n
0011 (3) Pin is connected to Peripheral signal spim0.miso
0100 (4) Pin is connected to Peripheral signal not applicable
0101 (5) Pin is connected to Peripheral signal not applicable
0110 (6) Pin is connected to Peripheral signal not applicable
0111 (7) Pin is connected to Peripheral signal not applicable
1000 (8) Pin is connected to Peripheral signal emac2.rxd2
1001 (9) Pin is connected to Peripheral signal not applicable
1010 (10) Pin is connected to Peripheral signal not applicable
1011 (11) Pin is connected to Peripheral signal not applicable
1100 (12) Pin is connected to Peripheral signal trace.d2
1101 (13) Pin is connected to Peripheral signal not applicable
1110 (14) Pin is connected to Peripheral signal nand.adq14
1111 (15) Pin is connected to Peripheral signal gpio1.io22

RW

0xF