mpu_status_l1_parity

         Parity status from L1 and scu. This is a read only register.
A write to this register should return an error.

[17] CPU1 SCU parity error
[16] CPU0 SCU parity error

[15] CPU1 BTAC parity error
[14] CPU1 GHB parity error
[13] CPU1 instruction tag RAM parity error
[12] CPU1 instruction data RAM parity error
[11] CPU1 main TLB parity error
[10] CPU1 data outer RAM parity error
[9]  CPU1 data tag RAM parity error
[8]  CPU1 data data RAM parity error.

[7]  CPU0 BTAC parity error
[6]  CPU0 GHB parity error
[5]  CPU0 instruction tag RAM parity error
[4]  CPU0 instruction data RAM parity error
[3]  CPU0 main TLB parity error
[2]  CPU0 data outer RAM parity error
[1]  CPU0 data tag RAM parity error
[0]  CPU0 data data RAM parity error.

Module Instance	Base Address	Register Address
`i_sys_mgr_core`	`0xFFD06000`	`0xFFD060AC`

Offset: 0xAC

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`														`scu` `0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`cpu1` `0x0`								`cpu0` `0x0`

mpu_status_l1_parity Fields

Bit	Name	Description	Access	Reset
17:16	`scu`	SCU parity interrupt status	`RO`	`0x0`
15:8	`cpu1`	CPU1 L1 parity interrupt status	`RO`	`0x0`
7:0	`cpu0`	CPU0 L1 parity interrupt status	`RO`	`0x0`