fpgaintf_en_1

         Used to disable individual interfaces between the FPGA and HPS.
This register is reset only on a cold reset (ignores warm reset).
      
Module Instance Base Address Register Address
i_sys_mgr_core 0xFFD06000 0xFFD06068

Offset: 0x68

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

ctmtrigger

RW 0x1

Reserved

stmevent

RW 0x1

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

dbgapb

RW 0x1

Reserved

trace

RW 0x1

Reserved

fpgaintf_en_1 Fields

Bit Name Description Access Reset
24 ctmtrigger
Used to disable the FPGA Fabric from sending triggers to HPS debug logic.  Note that this doesn't prevent the HPS debug logic from sending triggers to the FPGA Fabric.
Value Description
0 Disable
1 Enable
RW 0x1
16 stmevent
Used to disable the STM event interface. This interface allows logic in the FPGA fabric to trigger events to the STM debug module in the HPS.
Value Description
0 Disable
1 Enable
RW 0x1
8 dbgapb
Used to disable the debug APB interface. This interface allows the HPS debug logic to communicate with debug APB slaves in the FPGA fabric.
Value Description
0 Disable
1 Enable
RW 0x1
4 trace
Used to disable the trace interface. This interface allows the HPS debug logic to send trace data to logic in the FPGA fabric.
Value Description
0 Disable
1 Enable
RW 0x1