mpuwarmmask

         The MPUWARMMASK register is used by software to mask the assertion of module reset signals for hardware sequenced warm resets. There is a writeable bit for each module reset signal that is asserted by default on a hardware sequenced warm reset. If the bit is 1, the module reset signal is asserted by a hardware sequenced warm reset. If the bit is 0, the module reset signal is not changed by a hardware sequenced warm reset. The bit assignments of the *WARMMASK registers match the corresponding *MODRST registers. Any module reset signals that are never asserted by a warm reset have reserved bit offsets and are tied to 0 (read as 0, writes are ignored).

All fields are only reset by a cold reset.
Module Instance Base Address Register Address
i_rst_mgr_rstmgr 0xFFD05000 0xFFD05040

Offset: 0x40

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

wds

RW 0x1

mpuwarmmask Fields

Bit Name Description Access Reset
0 wds 
Masks hardware sequenced warm reset for both per-CPU  Watchdog Reset Status registers in MPU
 RW 0x1