nrstmodrst

         The NRSTMODRST register is used by software to trigger module resets (individual module reset signals). Software explicitly asserts and de-asserts module reset signals by writing bits in the appropriate *MODRST register. It is up to software to ensure module reset signals are asserted for the appropriate length of time and are de-asserted in the correct order. It is also up to software to not assert a module reset signal that would prevent software from de-asserting the module reset signal. For example, software should not assert the module reset to the CPU executing the software.

Software writes a bit to 1 to assert the module reset signal and to 0 to de-assert the module reset signal.

All fields are only reset by a cold reset

Module Instance	Base Address	Register Address
`i_rst_mgr_rstmgr`	`0xFFD05000`	`0xFFD05038`

Offset: 0x38

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`															`nrstpinoe` `RW 0x0`

nrstmodrst Fields

Bit	Name	Description	Access	Reset
0	`nrstpinoe`	Drives NRST output enable with data tied low to extend cold and warm reset	`RW`	`0x0`