ic_ack_general_call

         I2C ACK General Call Register

The register controls whether the I2C responds
with a ACK or NACK when it receives an I2C
General Call address.
Note :This register is applicable only when the I2C module is in slave mode

Module Instance	Base Address	Register Address
`i_i2c_emac_0_i2c`	`0xFFC02400`	`0xFFC02498`
`i_i2c_emac_1_i2c`	`0xFFC02500`	`0xFFC02598`
`i_i2c_emac_2_i2c`	`0xFFC02600`	`0xFFC02698`

Offset: 0x98

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`rsvd_ic_ack_gen_31to1` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`rsvd_ic_ack_gen_31to1` `RO 0x0`															`ack_gen_call` `RW 0x1`

ic_ack_general_call Fields

Bit

Name

Description

Access

Reset

31:1

rsvd_ic_ack_gen_31to1

Reserved bits [31:1] - Read Only

RO

0x0

ack_gen_call

ACK General Call.
When set to 1, the I2C module responds with a ACK
(by asserting ic_data_oe) when it receives a General Call.
Otherwise, the I2C module responds with a NACK
(by negating ic_data_oe).
Default Reset value: 0x1

Value	Description
0x0	NACK
0x1	ACK

RW

0x1