srr
Software Reset Register.
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_uart_0_uart | 0xFFC02000 | 0xFFC02088 |
| i_uart_1_uart | 0xFFC02100 | 0xFFC02188 |
Offset: 0x88
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
rsvd_srr_31to3 RO 0x0 |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
rsvd_srr_31to3 RO 0x0 |
xfr WO 0x0 |
rfr WO 0x0 |
ur WO 0x0 |
||||||||||||
srr Fields
| Bit | Name | Description | Access | Reset | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 31:3 | rsvd_srr_31to3 | Reserved bits [31:3] - Read Only |
RO | 0x0 | ||||||
| 2 | xfr | XMIT FIFO Reset. Writes will have no effect when FIFO_MODE == NONE. This is a shadow register for the XMIT FIFO Reset bit (FCR[2]). This can be used to remove the burden on software having to store previously written FCR values (which are pretty static) just to reset the transmit FIFO. This resets the control portion of the transmit FIFO and treats the FIFO as empty. This will also de-assert the DMA TX request and single signals when additional DMA handshaking signals are selected
|
WO | 0x0 | ||||||
| 1 | rfr | RCVR FIFO Reset. Writes will have no effect when FIFO_MODE == NONE. This is a shadow register for the RCVR FIFO Reset bit (FCR[1]). This can be used to remove the burden on software having to store previously written FCR values (which are pretty static) just to reset the reeive FIFO. This resets the control portion of the receive FIFO and treats the FIFO as empty. This will also de-assert the DMA RX request and single signals when additional DMA handshaking signals are selected (DMA_EXTRA == YES). Note that this bit is 'self-clearing' and it is not necessary to clear this bit.
|
WO | 0x0 | ||||||
| 0 | ur | UART Reset. This asynchronously resets the DW_apb_uart and synchronously removes the reset assertion. For a two clock implementation both pclk and sclk domains will be reset.
|
WO | 0x0 |