rescan_buffer_flag

         Rescan buffer flag.

Module Instance	Base Address	Register Address
`i_nand_dma`	`0xFFB80700`	`0xFFB80790`

Offset: 0x90

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`												`flag` `RW 0x0`

rescan_buffer_flag Fields

Bit	Name	Description	Access	Reset
3:0	`flag`	This register can be used to force rescan of buffer flags in any of the cmd-dma channels. The bit index decides the Channel number. Cmd-dma would rescan the buffer flag for matching condition and it executes the descriptor if it is ready. Hardware clears this register after generating the trigger event.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

3:0

flag

This register can be used to force rescan of buffer flags in any of the cmd-dma channels. 
                    The bit index decides the Channel number. Cmd-dma would rescan the buffer flag for matching 
                    condition and it executes the descriptor if it is ready. Hardware clears this register after 
                    generating the trigger event.

RW

0x0