onfi_device_no_of_luns

         Indicates if the device is an ONFI compliant device and the number
                                  of LUNS present in the device
      
Module Instance Base Address Register Address
i_nand_param 0xFFB80300 0xFFB803C0

Offset: 0xC0

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

ce_reduction_volume_addr_and_change

RW 0x0

Reserved

onfi_jedec_multiplane_erase_seq

RW 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

prog_page_reg_clear_enhancement

RW 0x0

Reserved

onfi_device

RW 0x0

no_of_luns

RO 0x0

onfi_device_no_of_luns Fields

Bit Name Description Access Reset
20 ce_reduction_volume_addr_and_change
Device supports CE pin reduction with volume assignments,volume addressing 
                 and volume change command sequence.For any device configured by host to be used in 
                 volume addressing mode, this bit must be set to 1.
                [list][*]1 - supported [*]0 - Not supported[/list]
RW 0x0
16 onfi_jedec_multiplane_erase_seq
Device supports ONFI JEDEC Multiplane erase sequence.(Only valid for Onfi devices)
                [list][*]1 - ONFI JEDEC Multiplane erase sequence supported 
                [*]0 - ONFI JEDEC Multiplane erase sequence not supported[/list] 
RW 0x0
12 prog_page_reg_clear_enhancement
Device supports program page register clear enhancement.In such a device,
                 a program can be initiated in a LUN even if a read command is ongoing in 
                  another LUN in the device.
                [list][*]1 - Program page register clear enhancement supported 
                [*]0 - Program page register clear enhancement not supported[/list] 
RW 0x0
8 onfi_device
Indicates if the device is an ONFI compliant device.[list]
                                      [*]0 - Non-ONFI compliant device 
                                      [*]1 - ONFI compliant device[/list]
RW 0x0
7:0 no_of_luns
Indicates the number of LUNS present in the device
RO 0x0