onfi_device_features

         Features supported by the connected ONFI device

Module Instance	Base Address	Register Address
`i_nand_param`	`0xFFB80300`	`0xFFB80380`

Offset: 0x80

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`value` `RO 0x0`

onfi_device_features Fields

Bit	Name	Description	Access	Reset
15:0	`value`	The values in the field should be interpreted as follows[list] []Bit 0 - Supports 16 bit data bus width. []Bit 1 - Supports multiple LUN operations. []Bit 2 - Supports non-sequential page programming. []Bit 3 - Supports interleaved program and erase operations. []Bit 4 - Supports odd to even page copyback. []Bit 5 - Supports source synchronous. []Bit 6 - Supports interleaved read operations. []Bit 7 - Supports extended parameter page. []Bit 8 - Supports program page register clear enhancement. []Bit 9 - Supports EZNAND. []Bit 10 - Supports NV-DDR2. []Bit 11 - Supports Volume Addressing. []Bit 12 - Supports External Vpp. []Bit 13-15 - Reserved.[/list]	`RO`	`0x0`

Bit

Name

Description

Access

Reset

15:0

value

The values in the field should be interpreted as follows[list]
                                  [*]Bit 0 - Supports 16 bit data bus width.
                                  [*]Bit 1 - Supports multiple LUN operations.
                                  [*]Bit 2 - Supports non-sequential page programming.
                                  [*]Bit 3 - Supports interleaved program and erase operations.
                                  [*]Bit 4 - Supports odd to even page copyback.
                                  [*]Bit 5 - Supports source synchronous.
                                  [*]Bit 6 - Supports interleaved read operations.
                                  [*]Bit 7 - Supports extended parameter page.
                                  [*]Bit 8 - Supports program page register clear enhancement.
                                  [*]Bit 9 - Supports EZNAND.
                                  [*]Bit 10 - Supports NV-DDR2.
                                  [*]Bit 11 - Supports Volume Addressing.
                                  [*]Bit 12 - Supports External Vpp.
                                  [*]Bit 13-15 - Reserved.[/list]

RO

0x0