multiplane_addr_restrict

         Address restriction for multiplane commands

Module Instance	Base Address	Register Address
`i_nand_config`	`0xFFB80000`	`0xFFB801A0`

Offset: 0x1A0

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`															`flag` `RW 0x0`

multiplane_addr_restrict Fields

Bit	Name	Description	Access	Reset
0	`flag`	This flag must be set for devices which require that during multiplane operations all but the address for the last plane should have their address cycles tied low. The last plane address cycles has proper values. This ensures multiplane address restrictions in the device.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

flag

This flag must be set for devices which require that during multiplane
                                          operations all but the address for the last plane should have their address
                                          cycles tied low. The last plane address cycles has proper values. This
                                          ensures multiplane address restrictions in the device.

RW

0x0