INTSTAT
This bit is used to enable interrupt generation on SERR lookup table overflow. When all the entries in the table are valid=1 and this is bit is enabled, serr_req signal will be asserted.
| Module Instance | Base Address | Register Address |
|---|---|---|
| ecc_emac0_tx_ecc_registerBlock | 0xFF8C0C00 | 0xFF8C0C32 |
| ecc_emac1_tx_ecc_registerBlock | 0xFF8C1400 | 0xFF8C1432 |
| ecc_emac2_tx_ecc_registerBlock | 0xFF8C1C00 | 0xFF8C1C32 |
Offset: 0x32
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Reserved |
DERRPENA 0x0 |
Reserved |
SERRPENA 0x0 |
||||||||||||
INTSTAT Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 8 | DERRPENA | Double-bit error pending for PORTA. |
RW | 0x0 |
| 0 | SERRPENA | Single-bit error pending for PORTA. |
RW | 0x0 |