ECC_WDataecc0bus

         The msb bit for the register is configured based on DAT parameter (RAM word size). Unimplemented bytes of this register will be reserved.

Module Instance	Base Address	Register Address
`ecc_emac0_tx_ecc_registerBlock`	`0xFF8C0C00`	`0xFF8C0C6C`
`ecc_emac1_tx_ecc_registerBlock`	`0xFF8C1400`	`0xFF8C146C`
`ecc_emac2_tx_ecc_registerBlock`	`0xFF8C1C00`	`0xFF8C1C6C`

Offset: 0x6C

Access: WO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`	`ECC_WDataecc3BUS` `0x0`							`Reserved`	`ECC_WDataecc2BUS` `0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`	`ECC_WDataecc1BUS` `0x0`							`Reserved`	`ECC_WDataecc0BUS` `0x0`

ECC_WDataecc0bus Fields

Bit	Name	Description	Access	Reset
30:24	`ECC_WDataecc3BUS`	Eccdata from the register will be written to the RAM.	`WO`	`0x0`
22:16	`ECC_WDataecc2BUS`	Eccdata from the register will be written to the RAM.	`WO`	`0x0`
14:8	`ECC_WDataecc1BUS`	Eccdata from the register will be written to the RAM.	`WO`	`0x0`
6:0	`ECC_WDataecc0BUS`	Eccdata from the register will be written to the RAM.	`WO`	`0x0`