flashcmdaddr

Module Instance	Base Address	Register Address
`i_qspi_qspiregs`	`0xFF809000`	`0xFF809094`

Offset: 0x94

Access: RW

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`addr` `RW 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`addr` `RW 0x0`

flashcmdaddr Fields

Bit	Name	Description	Access	Reset
31:0	`addr`	This should be setup before triggering the command with execute field (bit 0) of the Flash Command Control register. It is the address used by the command specified in the opcode field (bits 31:24) of the Flash Command Control register.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

31:0

addr

 This should be setup before triggering the command with execute field (bit 0) of the Flash Command Control register. It is the address used by the command specified in the opcode field (bits 31:24) of the Flash Command Control register.

RW

0x0