dmagrp_receive_interrupt_watchdog_timer

          Register 9 (Receive Interrupt Watchdog Timer Register) 

This register, when written with non-zero value, enables the watchdog timer for the Receive Interrupt (Bit 6) of Register 5 (Status Register)

Module Instance	Base Address	Register Address
`i_emac_emac0`	`0xFF800000`	`0xFF801024`
`i_emac_emac1`	`0xFF802000`	`0xFF803024`
`i_emac_emac2`	`0xFF804000`	`0xFF805024`

Offset: 0x1024

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`reserved_31_8` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`reserved_31_8` `RO 0x0`								`riwt` `RW 0x0`

dmagrp_receive_interrupt_watchdog_timer Fields

Bit	Name	Description	Access	Reset
31:8	`reserved_31_8`	Reserved	`RO`	`0x0`
7:0	`riwt`	RI Watchdog Timer Count This bit indicates the number of system clock cycles multiplied by 256 for which the watchdog timer is set. The watchdog timer gets triggered with the programmed value after the Rx DMA completes the transfer of a frame for which the RI status bit is not set because of the setting in the corresponding descriptor RDES1[31]. When the watchdog timer runs out, the RI bit is set and the timer is stopped. The watchdog timer is reset when the RI bit is set high because of automatic setting of RI as per RDES1[31] of any received frame.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

31:8

reserved_31_8

Reserved

RO

0x0

7:0

riwt

RI Watchdog Timer Count

This bit indicates the number of system clock cycles multiplied by 256 for which the watchdog timer is set. The watchdog timer gets triggered with the programmed value after the Rx DMA completes the transfer of a frame for which the RI status bit is not set because of the setting in the corresponding descriptor RDES1[31]. When the watchdog timer runs out, the RI bit is set and the timer is stopped. The watchdog timer is reset when the RI bit is set high because of automatic setting of RI as per RDES1[31] of any received frame.

RW

0x0