gmacgrp_mac_address9_high
Register 34 (MAC Address9 High Register)
The MAC Address9 High register holds the upper 16 bits of the tenth 6-byte MAC address of the station.
If the MAC address registers are configured to be double-synchronized to the (G)MII clock domains, then the synchronization is triggered only when Bits[31:24] (in little-endian mode) of the MAC Address9 Low Register are written. For proper synchronization updates, the consecutive writes to this MAC Address9 Low Register should be performed after at least four clock cycles in the destination clock domain.
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_emac_emac0 | 0xFF800000 | 0xFF800088 |
| i_emac_emac1 | 0xFF802000 | 0xFF802088 |
| i_emac_emac2 | 0xFF804000 | 0xFF804088 |
Offset: 0x88
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
ae RW 0x0 |
sa RW 0x0 |
mbc_5 RW 0x0 |
mbc_4 RW 0x0 |
mbc_3 RW 0x0 |
mbc_2 RW 0x0 |
mbc_1 RW 0x0 |
mbc_0 RW 0x0 |
reserved_23_16 RO 0x0 |
|||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
addrhi RW 0xFFFF |
|||||||||||||||
gmacgrp_mac_address9_high Fields
| Bit | Name | Description | Access | Reset | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 31 | ae | Address Enable When this bit is set, the address filter module uses the tenth MAC address for perfect filtering. When this bit is reset, the address filter module ignores the address for filtering.
|
RW | 0x0 | ||||||
| 30 | sa | Source Address When this bit is set, the MAC Address9[47:0] is used to compare with the SA fields of the received frame. When this bit is reset, the MAC Address9[47:0] is used to compare with the DA fields of the received frame.
|
RW | 0x0 | ||||||
| 29 | mbc_5 | This array of bits are mask control bits for comparison of each of the MAC Address bytes. When masked, the MAC does not compare the corresponding byte of received DA or SA with the contents of MAC Address9 high and low registers. Each bit controls the masking of the bytes. You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address. The array index corresponds to the byte (e.g. index 0 is for bits 7:0).
|
RW | 0x0 | ||||||
| 28 | mbc_4 | This array of bits are mask control bits for comparison of each of the MAC Address bytes. When masked, the MAC does not compare the corresponding byte of received DA or SA with the contents of MAC Address9 high and low registers. Each bit controls the masking of the bytes. You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address. The array index corresponds to the byte (e.g. index 0 is for bits 7:0).
|
RW | 0x0 | ||||||
| 27 | mbc_3 | This array of bits are mask control bits for comparison of each of the MAC Address bytes. When masked, the MAC does not compare the corresponding byte of received DA or SA with the contents of MAC Address9 high and low registers. Each bit controls the masking of the bytes. You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address. The array index corresponds to the byte (e.g. index 0 is for bits 7:0).
|
RW | 0x0 | ||||||
| 26 | mbc_2 | This array of bits are mask control bits for comparison of each of the MAC Address bytes. When masked, the MAC does not compare the corresponding byte of received DA or SA with the contents of MAC Address9 high and low registers. Each bit controls the masking of the bytes. You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address. The array index corresponds to the byte (e.g. index 0 is for bits 7:0).
|
RW | 0x0 | ||||||
| 25 | mbc_1 | This array of bits are mask control bits for comparison of each of the MAC Address bytes. When masked, the MAC does not compare the corresponding byte of received DA or SA with the contents of MAC Address9 high and low registers. Each bit controls the masking of the bytes. You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address. The array index corresponds to the byte (e.g. index 0 is for bits 7:0).
|
RW | 0x0 | ||||||
| 24 | mbc_0 | This array of bits are mask control bits for comparison of each of the MAC Address bytes. When masked, the MAC does not compare the corresponding byte of received DA or SA with the contents of MAC Address9 high and low registers. Each bit controls the masking of the bytes. You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address. The array index corresponds to the byte (e.g. index 0 is for bits 7:0).
|
RW | 0x0 | ||||||
| 23:16 | reserved_23_16 | Reserved |
RO | 0x0 | ||||||
| 15:0 | addrhi | MAC Address9 [47:32] This field contains the upper 16 bits (47:32) of the tenth 6-byte MAC address. |
RW | 0xFFFF |