DOEPTSIZ8

         Device OUT Endpoint 8 Transfer Size Register
      
Module Instance Base Address Register Address
i_usbotg_0_DWC_otg_intreg 0xFFB00000 0xFFB00C10
i_usbotg_1_DWC_otg_intreg 0xFFB40000 0xFFB40C10

Size: 32

Offset: 0xC10

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

RESERVED

RO 0x0

RxDPID

RO 0x0

PktCnt

RW 0x0

XferSize

RW 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

XferSize

RW 0x0

DOEPTSIZ8 Fields

Bit Name Description Access Reset
31 RESERVED
RESERVED
RO 0x0
30:29 RxDPID
 Applies to isochronous OUT endpoints only.
This is the data PID received in the last packet for this endpoint.
 2'b00: DATA0
 2'b01: DATA2
 2'b10: DATA1
 2'b11: MDATA
 
SETUP Packet Count (SUPCnt)
Applies to control OUT Endpoints only.
This field specifies the number of back-to-back SETUP data
packets the endpoint can receive.
 2'b01: 1 packet
 2'b10: 2 packets
 2'b11: 3 packets
Value Description
0x0 DATA0
0x1 DATA2 or 1 packet
0x2 DATA1 or 2 packets
0x3 MDATA or 3 packets
RO 0x0
28:19 PktCnt
Packet Count (PktCnt)
This field is decremented to zero after a packet is written into the
RxFIFO.
RW 0x0
18:0 XferSize
Transfer Size (XferSize)
Indicates the transfer size in bytes For endpoint 0. The core
interrupts the application only after it has exhausted the transfer
size amount of data. The transfer size can be Set to the
maximum packet size of the endpoint, to be interrupted at the
end of each packet.
The core decrements this field every time a packet is read from
the RxFIFO and written to the external memory.
RW 0x0