multiplane_operation

         Multiplane transfer mode. Pipelined read, copyback, erase
                                 and program commands are transfered in multiplane mode
      
Module Instance Base Address Register Address
sdm_i_nand_config 0xFFA10000 0xFFA10070

Size: 32

Offset: 0x70

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

flag

RW 0x0

multiplane_operation Fields

Bit Name Description Access Reset
0 flag
[list][*]1 - Multiplane operation enabled 
                                      [*]0 - Multiplane operation disabled[/list]
RW 0x0