IER

         Interrupt Enable Register:
Interrupt Enable Register, when the DLAB bit is zero; Divisor Latch (High), when the DLAB bit is one.
Each of the bits used has a different function and will be detailed in the bit
field descriptions.
      
Module Instance Base Address Register Address
i_uart_0_uart_address_block 0xFFC02000 0xFFC02004
i_uart_1_uart_address_block 0xFFC02100 0xFFC02104

Size: 32

Offset: 0x4

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

RSVD_IER_31to8

RO 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RSVD_IER_31to8

RO 0x0

PTIME

RW 0x0

RSVD_IER_6to4

RO 0x0

EDSSI

RW 0x0

ELSI

RW 0x0

ETBEI

RW 0x0

ERBFI

RW 0x0

IER Fields

Bit Name Description Access Reset
31:8 RSVD_IER_31to8
Reserved bits [31:8] - Read Only
RO 0x0
7 PTIME
Interrupt Enable Register: PTIME, Programmable THRE Interrupt Mode Enable.
Writeable only when THRE_MODE_USER == Enabled, always readable.  This is used
to enable/disable the generation of THRE Interrupt.
0 = disabled
1 = enabled
Value Description
0x0 Disable Programmable THRE Interrupt Mode
0x1 Enable Programmable THRE Interrupt Mode
RW 0x0
6:4 RSVD_IER_6to4
Reserved bits [6:4] - Read Only
RO 0x0
3 EDSSI
Interrupt Enable Register: EDSSI, Enable Modem Status Interrupt.
This is used to enable/disable the generation of Modem Status Interrupt. This is
the fourth highest priority interrupt.
0 = disabled
1 = enabled
Value Description
0x0 Disable Modem Status Interrupt
0x1 Enable Modem Status Interrupt
RW 0x0
2 ELSI
Interrupt Enable Register: ELSI, Enable Receiver Line Status Interrupt.
This is used to enable/disable the generation of Receiver Line Status Interrupt.
This is the highest priority interrupt.
0 = disabled
1 = enabled
Value Description
0x0 Disable Receiver Line Status Interrupt
0x1 Enable Receiver Line Status Interrupt
RW 0x0
1 ETBEI
Interrupt Enable Register: ETBEI, Enable Transmit Holding Register Empty Interrupt.
This is used to enable/disable the generation of Transmitter Holding Register Empty
Interrupt. This is the third highest priority interrupt.
0 = disabled
1 = enabled
Value Description
0x0 Disable Transmit empty interrupt
0x1 Enable Transmit empty interrupt
RW 0x0
0 ERBFI
Interrupt Enable Register: ERBFI, Enable Received Data Available Interrupt.
This is used to enable/disable the generation of Received Data Available Interrupt
and the Character Timeout Interrupt (if in FIFO mode and FIFO's enabled). These are
the second highest priority interrupts.
0 = disabled
1 = enabled
Value Description
0x0 Disable Receive data Interrupt
0x1 Enable Receive data Interrupt
RW 0x0