pinmux_i2c_emac2_usefpga

         Selection between HPS Pin and FPGA Interface for I2C_EMAC2 signals.  NOTE: These registers should not be modified after IO configuration.There is no support for dynamically changing the Pin Mux selections.
      
Module Instance Base Address Register Address
i_dedio_pinmux_csr 0xFFD13000 0xFFD1331C

Size: 32

Offset: 0x31C

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

sel

RW 0x0

pinmux_i2c_emac2_usefpga Fields

Bit Name Description Access Reset
0 sel
Select connection for I2C_EMAC2.
Value Description
0 I2C_EMAC2 uses HPS IO Pins.
1 I2C_EMAC2uses the FPGA Inteface.
RW 0x0