intrclr

         Interrupt Clear.

Writing 1 to a particular bit will cause that interrupt to be cleared if it was set.

Module Instance	Base Address	Register Address
`i_clk_mgr_clkmgr`	`0xFFD10000`	`0xFFD10014`

Size: 32

Offset: 0x14

Access: WO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`												`perlocklost` `0x0`	`mainlocklost` `0x0`	`perlockachieved` `0x0`	`mainlockachieved` `0x0`

intrclr Fields

Bit	Name	Description	Access	Reset
3	`perlocklost`	This is used to clear sticky periph PLL lock lost signal.	`WO`	`0x0`
2	`mainlocklost`	This is used to clear sticky main PLL lock lost signal.	`WO`	`0x0`
1	`perlockachieved`	This is used to clear sticky periph PLL lock achieved signal.	`WO`	`0x0`
0	`mainlockachieved`	This is used to clear sticky main PLL lock achieved signal.	`WO`	`0x0`